TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Sat Jun 24, 2017 7:20 am

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 18 posts ] 
Author Message
PostPosted: Mon Apr 15, 2013 8:21 pm 
Offline

Joined: Mon Jan 09, 2012 2:14 am
Posts: 141
Location: Salem OR
It saddens me but with my new job, I have get a couple diesel trucks and with the driveway already overfull, I have to get rid off all my gas cars.

So, I bought a 87 Sprint Turbo engine and transmission with extra parts and in the process of a rebuild from the previous owner. I will post up some pictures of a few bits, don't know what they are worth but as I have heard it, finding parts for the 87 turbo is harder.

Will be Parting out an '85 Sprint 2dr and 87 Sprint 4dr, engine from the '85 is in the '87 and the '87 is in the garage awaiting rebuild where I have all the parts it needs for the rebuild most still NIB.

I am located in Salem Oregon, Weekends are usually good for me, Mondays and Tuesdays are not but ask, I may get some time off during one of them depending on the week. The rest of the week is hit and miss since I drive school bus trips.


Image

Image

Image

Image

Image

Image

Image

Image

Could be way off in the prices but since I got to post some, here goes:
EPI/EFI, $125 Each
Rebuilt Head assembly $225
Used Head assembly $125 (not pictured)
Block $215
'87 Turbo Sprint Transmission (said to only have 40K on it when I bought it, looks great) $300

Been taking photos of the cars a little bit, will have a link with slide show, prices on the parts OBO right now, I got to look into what the parts go for, (lots of work and I don't have a lot of time at the moment) so make a fair offer.

http://s146.photobucket.com/user/Orpackrat/slideshow/Sprint%20Cars%20Part%20Out

I would like to have them parted out in the next 2 weeks or so, worst case scenario, I would have to junk them. Next best scenario, before junking them, time permitting (not something I have a lot of), pull every last part I can off and cram them into the little storage shed I have since I know how hard it can be to find good parts.


Top
 Profile  
 
PostPosted: Tue Apr 16, 2013 12:45 am 
Offline

Joined: Mon Jan 09, 2012 2:14 am
Posts: 141
Location: Salem OR
Okay, to cut down on PM's with people asking for the same parts, please post in this so I can keep better track of who is in line.

As of right now, I will post what person is after what parts so I can have the list in case they drop out. I am trying to keep it First Come First Serve to keep things fair.

dan:
taillights, ( 2 left - 2 right)
door mirrors, (2 left - 2 right)
fender lights, (2 left - 2 right)
gas cap (2)
speedometer (1)
door pockets, (2 pairs)
3 stop light, (2)
rear ashtray

mana:
Fender Lights LH & RH
all side fender the 2 RH and 1 LH

stif:
both taillights, the 3th stop loght, the side mirrors, an the front turn signal lights


To dan, I don't have the quantity wanted as its either missing or broken on the car/s.


Top
 Profile  
 
PostPosted: Tue Apr 16, 2013 9:09 pm 
Offline
User avatar

Joined: Tue Mar 26, 2013 9:56 pm
Posts: 28
Location: Tulsa, Oklahoma
Didn't see it listed, but do you have an 87 Turbo distributor?

_________________
1987 Sprinzuki Turbo

VelociRAPTOR (pron.: /vɨˈlɒsɨræptər/; Velociraptor (commonly shortened to 'raptor') translates to mean "SWIFT seizer," It is now extinct, but was a most famous and legendary fighting dinosaur animal specimen.


Top
 Profile  
 
PostPosted: Tue Apr 16, 2013 10:36 pm 
Offline
Island Inbreeder
User avatar

Joined: Tue Oct 18, 2005 6:56 pm
Posts: 6327
Location: Emerald city Washington
gage cluster for the T3.?
Front sway bar with mounts for T3


Top
 Profile  
 
PostPosted: Wed Apr 17, 2013 2:10 am 
Offline

Joined: Mon Jan 09, 2012 2:14 am
Posts: 141
Location: Salem OR
White Raptor wrote:
Didn't see it listed, but do you have an 87 Turbo distributor?


I think so, will have to check the all the spare parts I got with it, should have it though.

jaguar,vettes&sprints wrote:
gage cluster for the T3.?
Front sway bar with mounts for T3


Off of which car, the '87 or the '85?


Top
 Profile  
 
PostPosted: Wed Apr 17, 2013 10:20 am 
Offline

Joined: Mon Jan 09, 2012 2:14 am
Posts: 141
Location: Salem OR
Okay, going to update this as much as my time permits.

Parts Pulled:
Side Door Pockets -1 Set
3rd Brake Light

Parts hope to pull after work:
All Mirror assemblies
Tail Lights Assemblies (at least one set)


I have a split trip tomorrow and hope to get a lot more pulled so I can get the parts ready for shipping.


Top
 Profile  
 
PostPosted: Wed Apr 17, 2013 10:32 pm 
Offline

Joined: Thu Feb 24, 2011 10:53 pm
Posts: 645
Location: brainerd MN
How about a clean ,uncracked dash pad for a 1987 Sprint turbo???

_________________
Current stable:
1987 Sprint Turbo (Porsche Guards Red) 75k 5sp,AC, w/cruise, Resto-Mod,owned since 1997) (looking for dash-pad)
1989 GTI (white)104k 5sp,AC (Resto-mod completed 1999). (looks great, But rusted out ,need clean southern body.)Help!?
1991 Vert (red) 129k 5sp,AC, Resto-Mod, 75% Done.(Clean SW car)
1993 GT(Teal) 103k 5sp,AC,w/PW (Resto-Mod,60% done.)(Clean SW car)
1994 Swift GS 4Dr sedan (Painted 2005 Ford Kona Blue) 95k 1.3 SOHC 5sp


Top
 Profile  
 
PostPosted: Thu Apr 18, 2013 12:19 am 
Offline

Joined: Mon Jan 09, 2012 2:14 am
Posts: 141
Location: Salem OR
Prairie to Pine Co. wrote:
How about a clean ,uncracked dash pad for a 1987 Sprint turbo???


The only '87 Turbo parts I have is the Engine and Transmission, I do not have the Car itself. The '85 non-turbo has cracking on the dash and is the only one I have.


Top
 Profile  
 
PostPosted: Sun May 19, 2013 8:32 pm 
Offline

Joined: Sun Dec 30, 2012 3:38 pm
Posts: 33
Location: michigan
Hey how much for the g10t engine trans setup? Do you have all the ancillary wiring, ECU, etc? I am seriously interested and hope to hear from you very soon! Thanks!


Top
 Profile  
 
PostPosted: Fri May 24, 2013 1:40 am 
Offline

Joined: Mon Jan 09, 2012 2:14 am
Posts: 141
Location: Salem OR
I have to apologize I've been working far more than expected and am now faced with moving within a month and will not have room for the cars. I hoped to have time parting them out but its not looking.

Will probably have to create new thread for them but I'll just start with saying:

$1200 for both cars OBO, '85 Sprint 2dr, '87 Sprint 4dr.

'87 is missing dash, runs and drives but could use some tuning. Needs some work to head lights as in rewiring, interior is rough but it drives. Has all new brake shoes, pads, rotors, and wheel hubs ($110 each on the hubs). Engine in the '87 is from the '85. New struts are needed I believe in the '87 as well as rear shocks. Interior removed from rear of both cars.

'85 was bought as a parts car, engine and transmission removed, engine in '87, transmission in garage. Engine from '87 is in garage partially disassembled. Have parts to rebuilt engine, new piston rings, full engine gasket sets, carb repair kit, extra timing belt, bunch of odds and ends parts that were cheap enough on rockauto that I bought extras. Lots of good parts, each car could be used to rebuild the other and plenty of good parts left over.


Top
 Profile  
 
PostPosted: Mon Jun 03, 2013 2:07 am 
Offline

Joined: Mon Jan 09, 2012 2:14 am
Posts: 141
Location: Salem OR
Turbo block, rebuilt head assembly, some odds and ends, sold, will have to see what is left and update when I have more time.

I did find the Turbo Distributor and so many have been asking for it, I'm going to be gone for a few days so hopefully all who were looking for it will see this. Send me a PM and your offer and for the fun of it, why you need/want that part (want it to go to a good home).


Top
 Profile  
 
PostPosted: Fri Jun 07, 2013 9:24 am 
Offline

Joined: Sun May 05, 2013 1:03 pm
Posts: 12
Location: Evanston Wy
I was wondering if you still have the turbo exhaust manifold and if you do how much do you want for it. Also do you have the turbo. What kind of shape is it in and how much are you asking for it.



Thanks Gadget


Top
 Profile  
 
PostPosted: Wed Jun 19, 2013 12:24 am 
Offline

Joined: Tue Jan 01, 2013 7:37 pm
Posts: 28
Location: tucson arizona usa
does head have the intake and exhaust manifolds with it if yes then I will buy that's what I need. do you also still have turbo and related parts.


Top
 Profile  
 
PostPosted: Sun Sep 08, 2013 8:45 pm 
Offline
User avatar

Joined: Tue Sep 12, 2006 12:34 pm
Posts: 68
Location: Longmont, Colorado
Looking for 2 mirror assemblies for an 87 Turbo sprint. Specifically Need the passenger side mirror assembly. I found out today my son in law shattered the one on the car ( I am not a happy camper ), but if both are available , would like to get it too. Also looking for the vinyl insert for the back hatch and the spare tire cover. 101

Please let me know if any of the above are available. I am in Colorado ( 80503 ) , if you want to figure out shipping.

feel free to email me, or PM me.

Thx.

Max.

_________________
Current cars :
93 Metro w / 1.0
02 Jetta TDi
98 Blazer 4.3L
69 Camaro w/ I6 250
66 Chevy II 283 V8
52 Hudson Hornet

Miss my 87 Turbo Sprint :( ...BUT :I JUST GOT ANOTHER ONE!!!!! :)
Inliners forever!!


Top
 Profile  
 
PostPosted: Thu Sep 12, 2013 4:59 pm 
Offline

Joined: Sun Jun 23, 2013 10:39 pm
Posts: 83
Location: Winnemucca, NV
Are the headlights and corner markers from the 87 available? I am in dire need of both buckets and adjusters, as well as the clear corner markers. Please PM if they are available :thumb2:

_________________
87 Chevy Sprint 1.0L Carbureted.
3-Tech 226/395 Cam - Weber 32/36DGEV
The car I learned to drive a manual transmission and
took my driving test in. Was left as dead in the desert
for 10 years. Resurrected and modified to be my daily
driver and fun little toy. Ugly everywhere but under the hood!


Top
 Profile  
 
PostPosted: Sat Sep 14, 2013 4:06 pm 
Offline

Joined: Tue Aug 28, 2007 12:33 pm
Posts: 264
Location: yuma, AZ.
i need a sat of mark 1 pistons. got any?

_________________
"muchos tanks, village destruidos"
"muchos sanks, menos submarinos"
"its the dreams that keep you alive"
-vernon wasser-

88 sprint, 4dr sold :(
87 turbo 2dr, never ran :( :(
86 sprint, 2dr current DD! :)


Top
 Profile  
 
PostPosted: Sat Feb 04, 2017 3:36 pm 
Offline

Joined: Sat Feb 04, 2017 1:13 am
Posts: 11
Location: 11209
feb 04, 2017

Hi, do you still have the HEADLIGHTS/if so, could you tell me how it would be to ship them
to NY 11209? I am Henry (biguargent@aol.com/ (917) 500-8014.

Thanks,

Henry

--------------------------o--------------------------


Top
 Profile  
 
PostPosted: Thu May 11, 2017 6:59 pm 
Offline

Joined: Sat Feb 04, 2017 1:13 am
Posts: 11
Location: 11209
hI, I AM INTERESTED in the RED CHEVY following parts:
a)Driver's side DOOR armrest,plus
b)Driver's side DOOR handle bezel;plus
c)Driver's side DOOR map holder
d)BOTH HEADLIGHTS.

I WOULD APPRECIATE YOUR ANSWER ,IF YOU STILL HAVE IT.tHANKS


E. Cestona
Biguargent@aol.com
(917)500-8014

-------------------------o----------------------.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 18 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: Google [Bot] and 3 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group