TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Fri Oct 31, 2014 8:10 pm

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2, 3
Author Message
 Post subject: Re: GTi Dyno Runs
PostPosted: Sat Jul 26, 2003 8:25 am 
my new GT 94 whit:<br><br>header 4-1<br>muffler spor whiout cat<br>Green conic filter<br>c/r 10.3:1<br><br>power at wheels!
http://www.we-todd-did-racing.com/wetoddimage.wtdr/i=wMTMwMTU1NnM0MTNkZmQzMXk1NDE%3D


Top
  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Tue Jul 29, 2003 4:15 pm 
Offline
Senior Member

Joined: Sun Jun 23, 2002 5:10 pm
Posts: 1644
Location: Brisbane
Actually I run 98 octane only....with my timing, etc, I kinda have to.<br><br>Stock Gti's here make around 55-58kW at the wheels on the typical Aussie dyno, which is usually a Dyno Dynamics type dyno. So around 73-75hp. <p></p><i></i>


Top
 Profile  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Wed Aug 13, 2003 10:44 am 
Higher octane does not effect any power on our GTi's, just for the simple reason we don't have a knocksensor <!--EZCODE EMOTICON START :( --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/frown.gif ALT=":("><!--EZCODE EMOTICON END--> So the ECU cannot set the timing ignition earlier untill pingin'/knocking appears. Too bad. Honda's for instance do have one and higher octane would help the ecu-controlunit to get more power.<br><br>We have to adjust the basic timing (I've seen a few crazy people here with 13 degrees basic!!<!--EZCODE EMOTICON START :o --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/embarassed.gif ALT=":o"><!--EZCODE EMOTICON END--> )<!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <p></p><i></i>


Top
  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Wed Aug 13, 2003 3:21 pm 
Offline
Former TeamSwift Admin
Former TeamSwift Admin
User avatar

Joined: Tue Nov 19, 2002 9:58 am
Posts: 8143
Location: Seattle, WA
13degrees ran just fine w/ 91 octane, i would have gone higher if i could get 94 everywhere i drive ... *shrugs* .. i've got a rally chip now, so there's no need for so much base anymore. <p></p><i></i>


Top
 Profile  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Tue Aug 19, 2003 12:47 am 
Stock head<br>Cams (unsure what ones, bigger than bd14 smaller than Group a)<br>stock bottom end<br>filter<br>extractors 4-1<br>2inch cat back (hi flow 2 1/2 inch cat)<br>8.8mm Top gun leads standard coil<br>stock ECU<br><br>ran 59.4kw atw in 4th @ 188km/h.<br><br>The stock ecu is really holding it back atm, I have just got a new ecu with a rospen chip in it, and changed the exhaust to 2 1/2 inch press bent with a new muffler and resonator.<br><br>On a dyno dynamics dyno in shootout mode <p></p><i></i>


Top
  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Thu Aug 21, 2003 12:02 am 
you definetaly need ecu and bigger exhaust waylow.<br>and your cams seem to start making power after 5500rpm up until 8000rpm<br>your AFR was all over the place. <p></p><i></i>


Top
  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Thu Aug 21, 2003 11:54 am 
Offline
User avatar

Joined: Tue Apr 30, 2002 12:09 am
Posts: 356
Location: Edmonton
Here is my dyno run, 08/03: With a 16% drivetrain loss, It works out to about 120 crank hp....and my port/polish head, cam gears and cams are sitting in the garage...waiting...patiently....<br><br><!--EZCODE LINK START--><a href="http://www.jufa.ca/Kuzuki/Dyno/Aug%2003.pdf" target="top">www.jufa.ca/Kuzuki/Dyno/Aug%2003.pdf</a><!--EZCODE LINK END--><br><br>K & N Filter<br>3" Intake Pipe<br>56 mm MAF<br>60 mm TB<br>Cultus Intake Manifold<br>Aurora Ignition<br>ESR 4-2-1 Headers<br>2.25" Mandrel Bent Exhaust, no Cat<br>Tom's Chip<br>8 Degrees Base Timing<br>Underdrive Pulley<br><br> <p><!--EZCODE LINK START--><a href="http://jufa.ca/kuzuki/index.htm" target="top">My Suzuki 1.3 GT</a><!--EZCODE LINK END--></p><i>Edited by: <A HREF=http://pub83.ezboard.com/bteamswift.showUserPublicProfile?gid=drkuzuki>Dr Kuzuki</A> at: 8/21/03 11:55 am<br></i>


Top
 Profile  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Thu Aug 21, 2003 11:26 pm 
Offline
Teamswift Racer
User avatar

Joined: Tue Jan 29, 2002 7:41 pm
Posts: 1697
Location: Armstrong British Columbia
gti tranny ratio. up a couple posts. i mentioned something about 4th gear being 1:1 the slowuzkis are to my surprise. 4th and 5th are overdriven <p>MURR<br>Racing... Because other sports require only 1 ball</p><i></i>


Top
 Profile  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Sat Aug 23, 2003 5:43 pm 
I forgot to mention I run a SOHC gearbox <p></p><i></i>


Top
  
 
 Post subject: Re: GTi Dyno Runs
PostPosted: Sun Aug 24, 2003 9:52 pm 
Offline
Senior Member

Joined: Sun Jun 23, 2002 5:10 pm
Posts: 1644
Location: Brisbane
My Mk1 timing is not ecu-controlled and my dizzy is radically recurved with 14 degrees base and twenty degrees total advance all-in at 5000rpm or so.<br><br>Waylow, if your cams are in between the BD14 and Group A grinds and have 258deg and .340 lift then the actual grind number is 553/D2. You certainly need a better tuned setup to run these cams...they are what I have been using the past two or three years. <p></p><i></i>


Top
 Profile  
 
 Post subject: gti dyno runs
PostPosted: Thu Aug 28, 2003 8:32 am 
my car made 62.2fwkw at 6700-6800rpm<!--EZCODE EMOTICON START :\ --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/ohwell.gif ALT=":\"><!--EZCODE EMOTICON END--> <br>mods 4-1 exhaust and 2in mandrel bend<br>60mmtb and no maf<br>aftermarket computer.<br>prmium leads and 9<!--EZCODE EMOTICON START 8o --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/nerd.gif ALT="8o"><!--EZCODE EMOTICON END--> ctane<br>did 15.8 second 1/4 mile with 16in chromes, big front bar and was around 860kg at the time (with me in it)<!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <p></p><i></i>


Top
  
 
 Post subject: Re: gti dyno runs
PostPosted: Mon Sep 08, 2003 12:32 am 
that is 97+1 octane, on 4th gear<br><br><br>and how did this other gti make 141hp with similer mods to mine?<!--EZCODE EMOTICON START :eek --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/eek.gif ALT=":eek"><!--EZCODE EMOTICON END--> <br><br>what hp at fly wheel is 62fwkw? <p></p><i></i>


Top
  
 
 Post subject: hp
PostPosted: Tue Sep 09, 2003 1:43 pm 
62 kw is about 84 hp. That puts you in the 95 hp range at the flywheel.<br><br>I would expect there to be normal variation in power output on the stock motor, but that seems typical from what I have heard.<br><br>For comparison, Kyle's stock turbo motor (without the turbo) put down about 86 hp, while mine put down 95 at the wheels. Both engines had the benefit of a 2.25" cat-free exhaust and a removed airbox. <p></p><i></i>


Top
  
 
 Post subject: hi
PostPosted: Wed Sep 10, 2003 6:13 am 
i recently put my 97gti on the dyno. i have a full exhaust system includin extractors, diff cam rods and alot more little stuff.<br>its pretty stock but i got 97.6kw at the wheels <p></p><i></i>


Top
  
 
 Post subject: Re: hi
PostPosted: Thu Sep 11, 2003 10:32 pm 
Offline
Senior Swift Guru

Joined: Sun Sep 02, 2001 11:55 am
Posts: 2595
Location: Calgary, Alberta
I need a better stock motor man... Everybody NA whopped the butt of my crappy motor. 10hp@wheels difference with same mods on same dyno. I was happy for Scott, yet not happy at the same time. <!--EZCODE EMOTICON START :) --><img src=http://www.ezboard.com/intl/aenglish/images/emoticons/smile.gif ALT=":)"><!--EZCODE EMOTICON END--> <p><!--EZCODE FONT START--><span style="font-size:xx-small;"><!--EZCODE BOLD START--><strong>Kyle Jones<!--EZCODE LINK START--><a href="http://www.angelfire.com/de/ksj/myswift.html"><br>Junk-Yard Turbo set-up, formerly NOS-fed, constantly evolving 1989 Suzuki Swift</a><!--EZCODE LINK END--></strong><!--EZCODE BOLD END--></span><!--EZCODE FONT END--><br><br></p><i></i>


Top
 Profile  
 
 Post subject: GTI dyno runs
PostPosted: Mon Sep 15, 2003 4:40 pm 
Hi,<br> I have two dyno printouts for you. One with a peak of 108hp is with a GTI modified with cultus pistons, 49 mm throttle body, headers and a BD14 cam. The other is with individual throttle bodies and a motec which gave 113 hp. <br><br>P.S. I will have to e-mail it individually as I cannot figure out how to include pictures using this forum <p></p><i></i>


Top
  
 
 Post subject:
PostPosted: Mon Jan 26, 2004 8:16 am 
Offline
User avatar

Joined: Thu Aug 28, 2003 6:34 am
Posts: 383
Location: Jamaica W.I.
My results are

157Whp
140 ft.lbs torque @12lbs boost

going back this weekend to 14lbs


Top
 Profile  
 
 Post subject:
PostPosted: Mon Jan 26, 2004 5:33 pm 
Offline
User avatar

Joined: Thu Aug 28, 2003 6:34 am
Posts: 383
Location: Jamaica W.I.
does anyone have any figues higher than this?
if so what boost


Top
 Profile  
 
 Post subject:
PostPosted: Tue Mar 09, 2004 8:31 am 
Offline
User avatar

Joined: Thu Aug 28, 2003 6:34 am
Posts: 383
Location: Jamaica W.I.
here is my dyno sheet...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 69 posts ]  Go to page Previous  1, 2, 3

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group