TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Mon Sep 25, 2017 1:20 am

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 203 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9
Author Message
PostPosted: Fri Aug 11, 2017 8:47 am 
Offline

Joined: Sat Apr 04, 2009 2:16 pm
Posts: 127
Location: Minnesota
Aside from the starter's solenoid seemingly not doing its job without coaxing on occasion and a break in the exhaust back by the muffler, the car hasn't had any problems. I think I am up to 242,xxx miles.

I have installed sway bars from a 1996 model car. They fit right in, although you do have to fabricate some body mounts for the rear bar. It keeps the car a little more level, but I still blame the 12" wheels for that 80 mph swirrly effect. It probably doesn't help that the shock absorbers on the car are probably not up to par anymore.

I still drive it over 90 miles per work/home commute. A long 80 mph blast down the interstate is almost a daily thing for the car.

I think that earlier in this thread, or definitely somewhere else on the forum where burnt exhaust valves were the topic of discussion, someone insisted that these cars should not be driven more than like 65 mph "because they weren't designed to do that." Well, I exceed those figures daily on a 24 year old 3 cylinder swift. It doesn't seem to care.

The engine oil seals have all been replaced at one time or another, the same for the transmission. It has literally zero oil leakage now.


Top
 Profile  
 
PostPosted: Sat Aug 12, 2017 4:55 am 
Offline
User avatar

Joined: Tue Mar 16, 2004 6:23 am
Posts: 1743
Location: Washington, DC
phantomrt wrote:
I think that earlier in this thread, or definitely somewhere else on the forum where burnt exhaust valves were the topic of discussion, someone insisted that these cars should not be driven more than like 65 mph "because they weren't designed to do that." Well, I exceed those figures daily on a 24 year old 3 cylinder swift. It doesn't seem to care.

That may have been me, I have been known to say things along those lines before. I'm drifting the other way now, thinking that it's low RPM's with wide throttle openings that are more likely to burn valves. People who run the snot out of them and people with automatic transmissions, seem to have longer valve life.

_________________
91 Pontiac Firefly Turbo
10 Suzuki Kizashi


Alcohol, Tobacco, and Firearms
Should be the name of a convenience store, not a government agency


Top
 Profile  
 
PostPosted: Sat Aug 12, 2017 9:07 am 
Offline
Suzuki Elder
User avatar

Joined: Mon Dec 01, 2003 12:47 pm
Posts: 11668
Location: columbus, ohio
the severely limited displacement leaves high rpms the only place for performance to be achieved.

whip those squirrels! when i was driving normally aspirated 3 bangers i would absolutely flog them on a daily basis. if you lug the engine it is way more apt to burn exhaust valves.

keep the egr passages clean and clear. service the fuel pressure regulator in the throttle body. don't be afraid to run the engine above 4000 rpm.

imho, guys who lug these engine around and run transmission ratios way too high in an attempt to see high fuel economy are off the mark. more engine damage comes from that type of operation than comes from driving a 3 banger like you stole it. :wink:

_________________
1991 Blue Geo Metro Convertible highly modified 1.0L Turbo3 5 spd. - 1991 Red Geo Metro Convertible customized with a Twincam 5 spd.

My Turbo3 Project
My Cardomain Page -Ol' Blue
My YouTube Channel
My Photo Gallery
SAAB Sonett II


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 203 posts ]  Go to page Previous  1 ... 5, 6, 7, 8, 9

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 2 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group