TeamSwift
http://teamswift.net/

My swap: G13B SOHC 8v --> Twin Cam 16V
http://teamswift.net/viewtopic.php?f=27&t=51364
Page 1 of 1

Author:  alexsan [ Tue Jul 05, 2011 2:55 pm ]
Post subject:  My swap: G13B SOHC 8v --> Twin Cam 16V

:D I have a Suzuki swift 94
G13B 8v 192.400km
5 speed gearbox R serial, i dont know ratios :?
No A/C
GTi bumper
GTI fog lights with oem switch
Image
Personal steering wheel 350mm (Before in Suzuki Cultus)
Image
GTI Adjustable steering wheel

Image
Image
Image

Swap.....GTi complete setup! 8) 8) 8)

GTI cluster
Image
GTi Harness oem ECU and electrical
Image
Image
F5 ECU
Image
GTI air filter box OEM with K&N air filter and MAF sensor
Image
TPS sensor
Image
GTI igntion coil
Image
Image

Image

GTI intake manifold EFI
twin cam cylinder head (EPI) cams
GTI rear disc brake- OEM
GTI cast iron exhaust manifold - OEM
Custom exhaust system
GTI muffler - OEM
maybe GTI seats

:wink: more pics....to be continued

Author:  TheSilverBullet [ Tue Jul 05, 2011 2:57 pm ]
Post subject:  Re: My swap G13B SOHC 8v to Twin cam 16V

i'm waiting for updates. good going :mrgreen:

Author:  alexsan [ Sat Jul 09, 2011 9:18 am ]
Post subject:  Re: My swap G13B SOHC 8v --> Twin Cam 16V

process begins...
Image

Image

GTi electrical harness installed

Image

Image

Image

Image

ECU and harness installed

Image

Image

ready!!

Image

ingtion coil isntalled

Image


internals engine parts

block

Image

before pistons and crankshaft 1.3 8v sohc

Image

now!! :lol: GTi

Image

Image

Image

new oil pump Suzuki Genuine Parts

Image


new cover

Image

Image

Image


MAF support installed

Image


valves cover

Image

GTi Cluster ready!! 9000RPM :mrgreen: :mrgreen: :mrgreen:

Image

Image


GTi Adjustable steering wheel

Image

the cylinder head is in process...

Image

Image

Image

The cylinder head is in cleaning process and assembling....
the next update will be engine completed!!

Author:  alexsan [ Sun Jul 17, 2011 12:36 pm ]
Post subject:  Re: My swap: G13B SOHC 8v --> Twin Cam 16V

motor ready!

Image

Image

Image

Image

OEM GTI throttle body.... :twisted: soon upgrade!!!

Image

OEM GTi timer

Image

OEM GTI muffler

Image

OEM GTi rear discs swap

Image

Image
:| :shock: :? :roll: soon new shocks :twisted: and lowering springs

Author:  BajanCGM [ Fri Oct 21, 2011 10:15 pm ]
Post subject:  Re: My swap: G13B SOHC 8v --> Twin Cam 16V

Is the in tank fuel pump a direct swap or u have to change the complete tank? Im asking cause Im looking to swap my 8v carb with a gti engine also. Thanks :D

Author:  alexsan [ Sat Oct 22, 2011 4:03 pm ]
Post subject:  Re: My swap: G13B SOHC 8v --> Twin Cam 16V

BajanCGM wrote:
Is the in tank fuel pump a direct swap or u have to change the complete tank? Im asking cause Im looking to swap my 8v carb with a gti engine also. Thanks :D


new GTi tank, but the fuel pump fix on 8v tank

Author:  monte_98 [ Sat Oct 29, 2011 10:25 am ]
Post subject:  Re: My swap: G13B SOHC 8v --> Twin Cam 16V

I posted some comments about your car (using my spanish), but my comment got deleted. Anyway here goes again.

I am doing the same sort of conversion as yours, I got a convertible 1.0 going GTI. I have finished most of the project myself, I am at the point where I can get the car started. I got a few missing connectors that I still need to make sense of. Thanks for your pics they have help me to setup my connectors in the right spot. I was wondering if you have any pics of the water pump setup, looks like a couple of sensors got removed from mine, and I would like to confirm that. I am using customized headers on mine, however I am missing the oxigen sensor that goes in there too. I am using the convertible transmission instead of the GTI one.

After making the change, how does it feel the handling and cornering in yours?

Cheers

Monte

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/