TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Sun Jul 23, 2017 9:41 am

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Toyota dizzy for g13b
PostPosted: Mon Oct 16, 2006 3:50 am 
Offline
Teamswift Racer
User avatar

Joined: Fri Apr 02, 2004 5:56 am
Posts: 2321
Location: Christchurch NZ, quake capital
OK here's one for everybody who wants to run an aftermarket ECU but has the same old problem with the non-standard suzuki dizzy.

I spent a couple of hours sifting thru two pellets of distributors until I found this one, it's off a toyota cynos, 4afe? it's also the same as 4age dizzies apparently. The engagement tooth fits perfectly into the end of the cam, the only difference is the shaft is longer than the suzuki one, so you can use the whole distributor without modification with a suitable adapter.

This dizzy has 3 pickups, 24 teeth on the top wheel and 2 on each of the lower wheels so I can run sequential injection with my microtech.
Since I'm running quad coils I don't need the rotor so we machined the top off the dizzy cap.

Image

Image


Top
 Profile  
 
PostPosted: Tue Oct 25, 2016 5:29 pm 
Offline

Joined: Mon Sep 05, 2016 9:47 am
Posts: 21
Location: Brazil
work's good?


Top
 Profile  
 
PostPosted: Wed Oct 26, 2016 12:54 am 
Offline
Teamswift Racer
User avatar

Joined: Fri Apr 02, 2004 5:56 am
Posts: 2321
Location: Christchurch NZ, quake capital
:shock: ten year old post...

Yep works really well, enables you to get both cam and crank timing off the same unit.


Top
 Profile  
 
PostPosted: Wed Oct 26, 2016 10:39 am 
Offline

Joined: Thu Jul 01, 2004 3:52 am
Posts: 1463
Location: Vancouver, BC, Canada
your image hosting is very good too. :lol:


I also am surprised nobody replies this thread... Anyway that dizzy looks simple and easier than install new CKPS sensor and modified CKPS.... Great job but I wonder what kind of aftermarket ECU do you use at that time?

_________________
sorry bout my bad english


Top
 Profile  
 
PostPosted: Wed Oct 26, 2016 6:52 pm 
Offline

Joined: Mon Sep 05, 2016 9:47 am
Posts: 21
Location: Brazil
i instal a injection and need solucion for crank angle sensor.

yep 10 years :razz:


Top
 Profile  
 
PostPosted: Thu Oct 27, 2016 12:59 am 
Offline
Teamswift Racer
User avatar

Joined: Fri Apr 02, 2004 5:56 am
Posts: 2321
Location: Christchurch NZ, quake capital
CMA wrote:
your image hosting is very good too. :lol:


I also am surprised nobody replies this thread... Anyway that dizzy looks simple and easier than install new CKPS sensor and modified CKPS.... Great job but I wonder what kind of aftermarket ECU do you use at that time?


haha, dirty old photobucket, not sure why I used a image host instead of uploading it, oh well its survived numerous Team swift server upgrades over the years :lol:
Attachment:
Oct-2009 009.jpg

You can see the old microtech on the firewall with x4 ignitor, have just finished rewiring the car as I needed to move the ECU.
Attachment:
Interior06.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Thu Oct 27, 2016 2:26 am 
Offline

Joined: Thu Jul 01, 2004 3:52 am
Posts: 1463
Location: Vancouver, BC, Canada
Damn very clean interior... I don't even see any pebble rocks in there. :lol:

I can see that aftermarket ECU... thanks.

_________________
sorry bout my bad english


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group