TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Thu Sep 21, 2017 6:09 pm

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 6 posts ] 
Author Message
PostPosted: Sat Sep 08, 2012 5:21 pm 
Offline
User avatar

Joined: Mon Mar 28, 2005 2:29 pm
Posts: 73
Location: Tekirdag
Twincam 16 G13b head with honda 2.0 Crv timing belt 125 tooth
G16 Block
Honda D16 Crangshaft
Honda D16 ACL race main and rod bearings
CP high cr 75mm forged Honda D16 pistons
Honda D 16 Eagle Con rod set
Ford EDIS 4
Spectre Ems Pro ECU
Suzuki Gsxr 1000 ITB now Twin Dellorto DHLA 40 Carb.
With Redbull :D

Another request :huh:

http://www.facebook.com/media/set/?set= ... 439&type=3


Top
 Profile  
 
PostPosted: Wed Sep 12, 2012 6:29 am 
Offline

Joined: Mon Nov 12, 2007 1:00 am
Posts: 663
Location: Lakeland , Florida
Nice build my question i have to know is why didnt you just put a honda motor in the car when you went through the trouble and money to make the crank fit and then use the rods and piston???


Top
 Profile  
 
PostPosted: Wed Sep 19, 2012 10:52 pm 
Offline

Joined: Fri Jul 03, 2009 10:13 pm
Posts: 21
Location: canada
hey i noticed u did something diff from the other guys with d16 cranks correct me if im wrong but u did not trim the flywheel side of the crank to fit the gasket but made a plate with the honda gasket??? n then did the bolt pattern on the suzi flywheel is that correct???

if thats the case i wanna tell my buddy thats is going to use d d16 crank but hes planning onto filling the honda bolt pattern and drill the suzuki bolt pattern....


Top
 Profile  
 
PostPosted: Mon Oct 01, 2012 4:56 pm 
Offline
User avatar

Joined: Mon Mar 28, 2005 2:29 pm
Posts: 73
Location: Tekirdag
echeverri6 wrote:
hey i noticed u did something diff from the other guys with d16 cranks correct me if im wrong but u did not trim the flywheel side of the crank to fit the gasket but made a plate with the honda gasket??? n then did the bolt pattern on the suzi flywheel is that correct???

if thats the case i wanna tell my buddy thats is going to use d d16 crank but hes planning onto filling the honda bolt pattern and drill the suzuki bolt pattern....


There is no cuting or triming on the crank. it have complate original dimensions.
i made a custom plate for flywhell sealer with laser cutting. it is same with original plate only differances is sealer hole radius.


Top
 Profile  
 
PostPosted: Tue Mar 03, 2015 2:04 am 
Offline

Joined: Tue Feb 17, 2004 5:39 am
Posts: 205
Location: Melbourne
gt_ wrote:
Twincam 16 G13b head with honda 2.0 Crv timing belt 125 tooth
G16 Block
Honda D16 Crangshaft
Honda D16 ACL race main and rod bearings
CP high cr 75mm forged Honda D16 pistons
Honda D 16 Eagle Con rod set
Ford EDIS 4
Spectre Ems Pro ECU
Suzuki Gsxr 1000 ITB now Twin Dellorto DHLA 40 Carb.
With Redbull :D

Another request :huh:

http://www.facebook.com/media/set/?set= ... 439&type=3


GT you couldnt describe what you did to fit the a certain model of d16 crankshaft?
We can see you did a laser cut flange for the backing plate but also interested
to see what you did for the mains cap, block mains and what your previous big bore
79mm engine history? did it survive the big sleeves?

_________________
Suzuki bring back cheap lightweight cars but this time in RWD


Top
 Profile  
 
PostPosted: Sun Nov 13, 2016 10:50 pm 
Offline

Joined: Fri Aug 12, 2016 10:02 am
Posts: 13
Location: thailand
it is same with original plate only differances is sealer hole radius.
sbobet500


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 4 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group