TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Sun Sep 24, 2017 6:39 pm

Underbody braces, turbos and more!

All times are UTC - 5 hours




Post new topic Reply to topic  [ 3 posts ] 
Author Message
PostPosted: Tue Apr 22, 2014 2:51 pm 
Offline
User avatar

Joined: Fri Apr 19, 2013 8:58 pm
Posts: 29
Location: Venezuela
Update:

After long test and riding (googling), this is the final jetting I got for the G16 with a weber:

Primary air jet: Before: 170, After: 160
Secondary air jet: Before: 160, After: 170

Primary Fuel Jet: Before: 140, After: 155
Secondary Fuel Jet: Before: 140, After; 150

You can advance the timing 1 or 2 degrees and will run better, I have it on 7 degrees.

Code:
I can´t remember if I made a post about this, but here it goes, with youtube videos. Also applies for the 2E engine.

The thing is that certain cars share certain things, in my research (like 5 months I spent searching and looking at pictures)


Prior installation: [youtube]http://www.youtube.com/watch?v=s4OJRWzlA30[/youtube]

And Running: [youtube]http://www.youtube.com/watch?v=GzmZeowZwGQ[/youtube]

The thing is that if your Swift-Metro has that carburetor (the old one, that is actually the same that the Toyota Tercel uses)

[img]http://www.villagetoyotaparts.com/images/parts/toyota/fullsize/MAA707A.jpg[/img]
[img]http://res.cloudinary.com/saltside-production/image/private/t_large_ikman/c7bc9a70-79bd-11e2-98bb-12313b0619d6.jpg[/img]

Or easier, If your intake manifold has this form, then, the Weber Kit for the Toyota Tercel is an exact match

[img]http://cdn2.autopartsnetwork.com/images/catalog/brand/felpro/full/60686_P04_TOP.jpg[/img]

One thing that I have come with a little trouble is pcv valves, apparently they don´t sell the appropiate model for my car (even though they look correct), some may pass too much vacuum, other don´t, I am still awating for 2 FRAM that I bought recently on amazon, I hope these ones last longer. As I was saying, the car idles good, but the mixture screw goes 2 1/2 turns, withouth the pcv drawing vacuum (plugged), the screw goes 1 1/2 turns (since a new kit for the jets is out of the question until next year due to economy restrictions) I am inclined to think that the pcv is not the right one, or maybe I should connect it only to the valve cover instead of the Y connection between the air cleaner and the valve cover.

Also, since these are plastic pcv, they tend to die with heat (pretty hot place I live here), and they last less than a year, someone said that I could use a metalic pcv, but that I would need to find the right size for it and modify the place where is going to be installed.

Let the chat begging then  :D

_________________
Suzuki Swift GLX - 1.6L - SOCH 16 valves - Carb Model
Mods: Auto Tranny Cooler
Weber 32/36 kit from Toyota Tercel
2 row aluminiun radiator


Last edited by SWIFTDOOG on Fri Jan 08, 2016 3:44 pm, edited 1 time in total.

Top
 Profile  
 
PostPosted: Thu Apr 24, 2014 5:44 am 
Offline

Joined: Mon Jun 18, 2012 5:19 am
Posts: 26
Location: Azores
My carburetor is just like the one on that diagram. Can anyone tell me what other cars use that same carburetor?
It was really nice to find a rebuild kit for my carburetor or a new one.

My engine idles at 1600 rpm... to much air going in

Thanks.

_________________
Swift 1.3 GS 1986


Top
 Profile  
 
PostPosted: Thu Apr 24, 2014 8:49 am 
Offline
User avatar

Joined: Fri Apr 19, 2013 8:58 pm
Posts: 29
Location: Venezuela
The cars:

Image

Image

Image

Image

Also, the Toyota Starlet that is from 1998 I think, the hatckback model also uses that same carburetor, you can find the kits on ebay, but do a search for Toyota Tercel, since the Swift, nor Toyota went to the US with those carbs.

_________________
Suzuki Swift GLX - 1.6L - SOCH 16 valves - Carb Model
Mods: Auto Tranny Cooler
Weber 32/36 kit from Toyota Tercel
2 row aluminiun radiator


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group