TeamSwift

Home of the Suzuki mini-compacts ! Your Home for all things Suzuki Swift, Geo Metro, Holden Barina, Chevy Sprint, Pontiac Firefly, and Suzuki Cultus. TeamSwift is a technical performance oriented community!
It is currently Wed May 22, 2013 2:47 am

View unanswered posts | View active topics


Board index » General Performance » MK2/3 1.0 & 1.3 SOHC Non-Turbo

All times are UTC - 5 hours




Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 
  Print view Previous topic | Next topic 
Author Message
SoloCon
 Post subject: It wants to DIEEEE :(
PostPosted: Sun Feb 26, 2012 3:58 am 
Offline

Joined: Mon Mar 22, 2010 11:20 pm
Posts: 13
Location: Phoenix Arizona
So, I am in the process of putting a 93 1.0 Geo metro into my buggy but am having an issue with it. When "flooring" the gas, the motor won't rev up and acts like it about to die and loses power in the motor (wont Rev). At this point, if I let go of the gas and push it in very slow, I can stop if from dieing and drive. I can't even pass about 3K RPM.

As I am putting this in a little buggy, I have removed all vacuum hoses but the one going to my MAP. The TPS and MAP both show within the correct power/ground voltage.

Anyone have any other idea on what to check?
Top
 Profile  
 
top down@-40
PostPosted: Sun Feb 26, 2012 7:03 am 
Offline
User avatar

Joined: Thu Jul 09, 2009 1:14 am
Posts: 1470
Location: Prince George B.C. Canada
Fuel pressure? Show us some pictures of what you have and give us some more background on the build. Strictly because this seems to be a custom build and it will help in diagnosing.
Top
 Profile  
 
SoloCon
PostPosted: Sun Feb 26, 2012 7:20 am 
Offline

Joined: Mon Mar 22, 2010 11:20 pm
Posts: 13
Location: Phoenix Arizona
In the below picture, I have connected C (Map) to E. I have also fixed my 2 water (Heater lines??) as well. Besides that, everything else is just capped off.

My fuel is at about 10-14 PSI Even when reving.

Image
Top
 Profile  
 
top down@-40
PostPosted: Sun Feb 26, 2012 7:25 am 
Offline
User avatar

Joined: Thu Jul 09, 2009 1:14 am
Posts: 1470
Location: Prince George B.C. Canada
10 to 14lbs sounds pretty low for these engines. Do a search, I think it should be 3 times that or more. Make your pictures smaller.
Top
 Profile  
 
t3 ragtop
PostPosted: Sun Feb 26, 2012 8:28 am 
Offline
Destroyer of Databases/One man, one post
User avatar

Joined: Mon Dec 01, 2003 12:47 pm
Posts: 10135
Location: columbus, ohio
ralph is right, you should have around 60 psi from the pump, dead headed, and the system pressure should be around 36 psi with the engine operating.

it sounds to me like your fuel pump is bad.

_________________
1991 Blue Geo Metro Convertible highly modified 1.0L Turbo3 5 spd. - 2000 Chevy Metro 1.3L MPFI automatic. - 1991 Red Geo Metro Convertible customized 1.0L 5 spd.

My Turbo3 Project

My Cardomain Page -Ol' Blue

My YouTube Channel

My Photo Gallery

SAAB Sonett II
Top
 Profile  
 
jaguar,vettes&sprints
PostPosted: Sun Feb 26, 2012 4:53 pm 
Offline
Island Inbreeder
User avatar

Joined: Tue Oct 18, 2005 6:56 pm
Posts: 5354
Location: Emerald city Washington
might have jumped the Timing belt
better have a look at the timing belt crankshaft gear pully
you Might have issues
.
Image

_________________
.

t3 ragtop wrote:
the 3 banger isn't at all a "grenade." it's a tough little son of a bitch doing a big job. respect it.
suprf1y wrote:
I didn't save anything.Vehicles are to me, like little boys are to Tommy.Toys to be abused for my own personal pleasure.
G-Whiz wrote:
I don't let just anyone work on my cars. Like the saying goes, "You don't let another man mess with your wife, so why would you let him mess with your car".


Last edited by jaguar,vettes&sprints on Sun Feb 26, 2012 4:54 pm, edited 1 time in total.

Top
 Profile  
 
jaguar,vettes&sprints
PostPosted: Sun Feb 26, 2012 4:54 pm 
Offline
Island Inbreeder
User avatar

Joined: Tue Oct 18, 2005 6:56 pm
Posts: 5354
Location: Emerald city Washington
Image
.
Image
Top
 Profile  
 
codyb76
PostPosted: Mon Feb 27, 2012 1:15 am 
Offline

Joined: Thu Jul 20, 2006 7:17 pm
Posts: 981
Location: Alberta, Canada
Fuel pressure is fine. Tbi geos run low pressure, 10-14 sounds about right. Only the multi port models run the higher pressures. Do check that crank key way. Its common, and also nice to make sure it's checked and torqued with a new seal to prevent leaks or keyway issues in the future.

_________________
1995 Swift w/16V 4.39s, 3tech cam, Esteem t-body, Header, needs more.
1995 Gt Mustang "Boss Shinoda" package.
1999 F150 4x4 Supercharged
1967 Mustang 428 auto, never ending expensive project
1993 Civic si h22a, fell in my lap, couldn't resist!
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 1 of 1
  [ 8 posts ] 

Board index » General Performance » MK2/3 1.0 & 1.3 SOHC Non-Turbo

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 1 guest

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
Powered by phpBB® Forum Software © phpBB Group